Find an Expert
![](/wp-content/themes/the-box/images/default_avatar.jpg)
Structural Failure Analysis and Design, Including Thermal and Non-Linear Analysis
Expert W. Expert has been involved in finding the causes and fixing thermal stress problems since the mid 1970s. These problems have been related to thick walled boiler components, heat exchangers, fluid beds, and fuel cells as well as high…
![](https://experts.expertengine.com/wp-content/uploads/experts/722834.jpg)
Analog, Mixed-Signal, Low-Power VLSI, SOI, SOS, Image Sensors, Sensors, Biomedical Instrumentation,
Expert provides custom analog IC design, mixed-signal and RF design, IC layout and verification, and development services. He also creates mixed-signal and analog modules for SoC and ASIC chips used in applications such as analog-front-ends (AFE) and transceiver modules for…
![](https://experts.expertengine.com/wp-content/uploads/experts/722831.jpg)
Petrochemical Process Design, Metals Processing, Activated Carbon, Marketing New Ideas
Expert has 15 years of experience in marketing research. He worked for eight years in marketing research at Amoco, four years as Director of Marketing Research. His major contributions at Amoco include: guiding Amoco’s marketing research to enhance and defend…
![](/wp-content/themes/the-box/images/default_avatar.jpg)
Supply Chain Cost Reduction, Contract Services Management, and Batch Process Design, project management
Expert wrote and implemented an improved incident investigation procedure for his plant and has also done extensive engineering work around avoiding operating and mechanical accidents in the work place. He has worked with his company’s contractors to reduce their safety…
![](https://experts.expertengine.com/wp-content/uploads/experts/722794.jpg)
Electrostatic, Particulate and Environmental Process Development and Commercialization
After earning his PhD in solid state physics from Ohio State, Expert has centered his attention for more than 40 years on providing state-of-the-art equipment and services to enable and improve industrial operations that involve electrostatic and particulate processes. As…
![](https://experts.expertengine.com/wp-content/uploads/experts/722757.jpg)
Water Treatment, Corrosion By Waters, Boiler Water Treatment, Cooling Water Treatment, Demineralization, Reverse Osmosis, Clarifiers Cold Lime Softeners
Expert understands the chemical processes and had practical experience in the use of activated carbon in water and wastewater treatment to remove organic contaminants and chlorine. She has audited existing applications for conformance to industry standards for contaminant removal and…
![](/wp-content/themes/the-box/images/default_avatar.jpg)
Computer & Networking Technology Support for Small Business, Microwave & Millimeter Wave Technology
Characteristic impedance is an extremely imporant concept in high-frequency engineering and expresses the relationship between high-frequency voltage & current existing on a transmission line or circuit structure. It is used extensively in the design and analysis of high-frequency circuits and…
![](https://experts.expertengine.com/wp-content/uploads/experts/722688.jpg)
Polymer & Composite Materials Science, Modeling, Structure-Property Relations, Technology Assessment
Expert has four decades of experience as a researcher on structure-processing-morphology-property-performance relationships in polymers (plastics, elastomers/rubbers, thermosets) and composites. He is considered by many researchers to be the world's foremost authority on quantitative structure-property relationships (QSPR) in polymers. He is…
![](https://experts.expertengine.com/wp-content/uploads/experts/722672.jpg)
Oil, Gas, Petrochemicals and Renewable Fuels & Chemicals, Biomass and Biorefineries
He designed three state of art methanol fed biodiesel plants in the US and one for Petrobras in Brazil. Developed Kreido biodiesel technology and advised the leading financial firms on biofuel investments. Served on ASTM biofuels committees and spoke at…
![](https://experts.expertengine.com/wp-content/uploads/experts/722631.jpg)
Mechanical Engineering Design and Analysis
Expert has more than 30 years of experience in providing mechanical engineering support to electronic and LASER products for military and commercial applications. He has performed in engineering, program, and supervisory roles including design, analysis, budgets, scheduling, manufacturing support, field…