Find an Expert
Forensic Engineering, Metallurgy and Materials Engineering, Failure Analysis
As a metallurgist and Professor of Engineering, he has taught about the microstructural design of cast irons and the properties associated with each microstructure. He has also investigated failures of cast iron components under varied service conditions. As a metallurgist…
Textile Flammability and Dyes, QC for Color, Textile Environmental, Training
Expert has over 25 years experience with bleaching textile materials composed of cotton, flax, wool, polyester and viscose on a full range of equipment including continuous steaming(roller and flatbed), jiggers, pad-batch, jets yarn package, skein and garment laundry. He is…
Thin Film Deposition, Chemical Mechanical Polishing, Semiconductor Process Integration
Expert has 10 years of experience developing consumable products and processes for application in chemical mechanical polishing. He holds approximately ten patents and patent applications on consumables and processes for chemical mechanical polishing. The expert has intimate knowledge of chemical…
Supplier Evaluation/Audit, Metallurgy, Foundry Tech, Forgings, Heat Treatment
Cast iron family includes gray iron, S. G. iron, malleable iron, abrasion and wear resistant alloy cast iron, etc. Expert has applied his hands on experience of more than 25 years in the reputed Automobile Industry to the varieties of…
Lube, Fuel, Hydraulic and Crankcase Ventilation Filtration
Expert has applied his engineering background to automotive filter applications. He has extensive experience in multiple types of automotive filtration. He has designed filters for lube, fuel and crankcase ventilation automotive applications. In the design of these products he has…
Chemical Process Industries, Waste Water and Air Pollution Control
Expert has wide ranging experience in the efficient application of Chemical Engineering principals such as Unit operations, Unit Processes and materials of construction towards economic & safe conversion of raw materials into useful products, and sound environmental stewardship. He has…
Corrosion, Materials, & Chemicals: Oil & Gas Production and Wastewater Treatment Facilities
Expert is experienced in materials engineering, corrosion control and mitigation, failure analysis, root cause analysis, materials selection, non-metallic materials, protective coatings, cathodic protection, environmental control, specifications and standards. He has made contributions in pipeline corrosion integrity management, risk assessment, risk-based…
Surface Science, Polymers, Textiles, Testing Materials, Plastics, Physical Chemistry, Pharmaceutical
Expert worked for three years as the Director of RD&E for the chemical products division of Waters Inc. In addition to the direction of the research in chromatographic media he was co-inventor of 7 patents for water-wettable extraction media and…
Minerals Preparation for Iron and Steel incl. DRI, Agglomeration and Project Development
Direct reduced iron is the solid state conversion of iron oxide to metallic iron. Expert has been involved in the field of direct reduced iron since 1969 with the commissioning of the first Midrex DR commercial plant operation participating in…
Continuous Casting Copper Rods and Flats
The surface of copper wire rods and flats has to be as free from oxides as possible prior further processing. He has the knowledge to promote maximum efficiency from the IPA in-line pickling systems. To further improve surface quality, he…